전자랜드 하계휴가 기간 안내
중고/위탁제품
Entreq
DDC/ DAC
Network Player/DAP
HIFI 앰프
진공관 앰프
톨보이형스피커
BBC 라이센스 스피커
북셀프/서라운드
CD/SACD PLAYER
턴테이블
카트리지
전원장치
케이블
RADIO
PHONO EQ/헤드폰앰프
TUNER
주변기기/스탠드
미니오디오
한정 세일
서울전자 추천상품
새로 입고된 제품
시스템
추천상품
5.1 스피커
신제품 소개
청음실안내
판매완료제품/단종제품
제품뉴스
리뷰 모음
제품 설치기
질문과 답변
중고 장터
자료실
WHAT-HIFI탐방기
자유 게시판
서울전자 뉴스
정기휴무일
우리은행 에스크로
A/S 센타
찾아오시는길
동호회
배송추적
(0)
:::현재위치 HOME ▶ PHONO EQ/헤드폰앰프 ▶ Manley ▶ manley steelhead(맨리 스틸헤드) rc phono stage
    
 
 
manley steelhead(맨리 스틸헤드) rc phono stage
판매가격 :  
주문수량 :
제조사 : Manley
원산지 : 미국
합계금액 :  
   
 


mshlr-f-blue-2019.png


mshlr-b.png


mshlr-psu-2019-web.png


Manley-Stealhead-d67a25239a.png


It has two Moving Coil inputs with selectable impedance load 25, 50, 100, 200 and 400 Ohms via Mr. Clever "Steelhead" transformer/autoformer.


It also has variable and selectable Moving Magnet input impedances too 25, 50, 100, 200 Ohms and 47 kOhms. Very nifty is the selectable-dial-able-in-able-from-the-faceplate-able capacitive loading for all three of the MM & MC inputs 0 to 1100 picofarads in 10 picofarad steps. Very cool! Equalize baby! TEN picofard steps! Wow! Now you can really dial this in for perfect cartridge matching with ZERO penalty. None of this switching detracts from the sound quality or adds any extra anything to the signal path. Rest assured.


It's got six tubes. 2 x 6922 plus 4 x 7044 or 5687. It's got a big honkin' volume control.

It can drive an amplifier directly if you want, if you don't "do" digital. Hey and if you happen to have three turntables set up, we give you 2 x MC and 1 x MM selectable inputs! It's got variable and fixed volume outputs. And All-tube really low Z tube buffered outputs. Like inherently 20 Ohms plus the little 47 Ohm "OK drive those high capacitance audiophile cables why doncha" resistor, so it's real output impedance is only 67 Ohms. No wanky cathode follower (oh bor-ing) output here like the other guys. We got your real low impedance all-tube outputs right here! It will drive anything and everything. Long cables, no problem.


It's got selectable gain 50, 55, 60, 65dB on a switch that even auto-mutes as you change it so no nasty bangs.

Gain switch markings are referred to from the input of the 1st active electronics at 1 kHz to the fixed output @ 10k load, regardless of whether source is MM or XFMR stepped-up MC. It is not really practical to include MC step-up gain on the front panel markings due to the variable SOURCE impedances of the MC cartridges and the variable LOADING that the input XFMR will have on any given cartridge. All of this total MC gain variability should be confined to about 3 to 12 dB of range though. XFMR step-up gain plateaus as the load Z on a given MC cartridge is optimized...producing no VOLTAGE gain but in fact a bit more POWER gain... All this means you should set a load Z which sounds best with your particular MC cartridge and adjust gain to suit your system's operating level. Whatever you like. You will not blow anything up. (Bottom line: there is plenty of gain... enough to do justice to your fave lo-output MC cartridges).


It's got a mute switch. It's got a "just turn it down while I cue up so I don't throw my woofer cones across the room but I still want the same volume I was listening at before I flipped the side" DIM switch.


And what goes with DIM better than SUM which would be the MONO button... It has a killer hyper-regulated outboard power supply that plugs in on the huge-est connector you ever saw. And you can just hit the "standby" button to keep everybody off while you take a small holiday to Tahiti. A backlit "MANLEY STEELHEAD" illuminated badge reflects back to vinyl-days-of-yore while the millions of BLUE LEDs remind you that this is modern tube engineering design, baby! The VARIABLE Outputs are controlled by the precision film dual NOBLE® volume control. They are SMOOTH action these days as the fashion went against the detented ones. This is a tweak-o-holic tube-lover's dream....

Let's talk about the LINE input some more:


There is a stereo LINE input included as standard. This means you can drive your amplifiers directly from the Steelhead's Variable Outputs and select whether you are listening to the Steelhead phono stage or any analog LINE-level source (the analog outputs from your CD player, DAC (Digital to Analog Converter), Tape, Tuner, Television, a whole 'nuther preamplifier's main line output, or better yet, use a Manley SKIPJACK to add up to 4 more LINE inputs into your Steelhead!) This feature turns the hifi world upside down. It is novel.


Other features we should mention:

LINE input comes after RIAA stage, but before the volume control and Variable output white follower buffer. The LINE button on faceplate selects LINE input or the output from the built in RIAA stage.

There are clever anti-RFI grounding options user selectable via dip switches on the back for those in high Radio Frequency Interference zones. If you are picking up a local radio station through your system, try playing with these switches.


All the inputs show up via standard RCA jacks.

There is an additional pair of RCA Outputs for those bi-amping or driving amps and a subwoofer directly from the Variable Outputs. This second set of outputs is wired in parallel to the Variable Outputs. If you need them wired to the Direct Outputs, we can do that too upon request.

The motorized volume control has a smooth action when turned by hand or one can control it via the REMORA REMOTE push buttons.


Badge illumination uses nice looking white LEDs which will never burn out.

Output Muting relays changed to short outputs if power is turned off.

Output Muting relays short out the outputs if power is turned off preventing unwanted bangs or pop noises.


The SLEEP button puts the unit into standby conserving power and tube life.

The audio (audible) circuitry has remained largely unchanged since the first Steelhead shipped in 2001.

    



Vacuum tube complement: 6922 SOVTEK Russian x 2 (gain) plus JAN NOS GE 7044 or 5687 x 4 (output buffers)

Fuse type and ratings @ 117 VAC operation: 1.5 Amp 3AG slow-blow mains fuse 0.5 Amp 3AG slow-blow logic fuse

Fuse type and ratings @ 230 VAC operation: 0.75 Amp 3AG slow-blow mains fuse 0.25 Amp 3AG slow-blow logic fuse

Moving Magnet input impedance: 5-step user adjustable via fixed low-noise resistors. 25, 50, 100, 200 and 47000 Ohms.

Moving Coil input impedance: 5-step user adjustable via multi-tap autoformer: 25, 50, 100, 200 and 400 Ohms.

Input Termination Capacitance: Front Panel Selectable in 10 picofarad steps from 10 to 1100 pF (1.1nF) Residual input capacitance less than 40 pF.

Gain: 4-step user adjustable, 50, 55, 60 and 65 dB active gain at 1 kHz referred to the FIXED output jack into a 10 kOhm load. Additional gain available via the MC input's step-up autoformer. See Owner's Manual for discussion.

Deviation from RIAA curve: Less than +0.5 / -0.3 dB from 20 Hz to 20 kHz at any gain setting. Typically less than ±1 dB from 10 Hz to 100 kHz

Inter-channel differential phase: Less than 4 degrees from 20 Hz to 20 kHz at any gain setting. Typically less than 2 degrees.

Inter-channel differential gain: Less than ±0.5 dB from 20 Hz to 20 kHz at any gain setting.

Dynamic Range: 101 dB @ 1 kHz, 1% THD measured with 200 Ohm source, 47 kOhm input, @ 55dB Gain 97 dB @ 1 kHz, 0.1% THD

THD: 0.0042% at 1V output @1kHz

REMORA RF REMOTE: controls motorised volume control up/down functions; uses 9v battery

Maximum MM input level: 50 mVrms @ 1KHz for an output of 17 Vrms or -23.8 dBu @ 1KHz for an output of +27 dBu @ 1.5% THD

Maximum MM input level: 93 mVrms @ 1KHz for an output of 29 Vrms or -18.4 dBu @ 1KHz for an output of +32.3 dBu @ 10% THD

Maximum MC input level: 39 mVrms @ 1KHz for an output of 17 Vrms or -26 dBu @ 1KHz for an output of +27 dBu @ 1.5% THD

Maximum MC input level: 72 mVrms @ 1KHz for an output of 29 Vrms or -20.6 dBu @ 1KHz for an output of +32.3 dBu @ 10% THD

Maximum LINE input level: 26.5Vrms @ 1KHz for an output of 22.8Vrms or +30.6dBu @ 1KHz for an output of +29.3dBu @ 0.07% THD

Maximum Output: +27dBm @ 1KHz with 3% THD into 100 kOhm load

FIXed Output impedance: 150 Ohms. Minimum suggested load greater than 1500 Ohms.

VARIable Output impedance: 75 Ohms. Minimum suggested load greater than 600 Ohms.

 
 
 Variable Output GAIN SettingFixed Output9:0012:00V/C FULLMM Noise (S+N+D) / (N+D):50 dB86dB108dB99dB86dB200 Ohm source, 47 kOhm input
A-weighted Referred to 2.54 mV
rms @ 1 kHz55 dB84dB108dB99dB85dB60 dB80dB108dB94dB80dB65 dB75dB108dB89dB75dB MC Noise (S+N+D) / (N+D):50 dB84dB108dB98dB85dB100 Ohm source, 100 Ohm input
A-weighted Referred to 0.5 mV
rms @ 1 kHz and rated Input Z55 dB80dB108dB95dB81dB60 dB75dB108dB90dB76dB65 dB70dB107dB85dB71dB
 
 

Power consumption: 100 watts

Outboard Power Supply: is factory set for 100V, 120V or 220-240VAC operation for original destination country's mains voltage.

Operating Mains Voltage: 120 to 240VAC operation changeable with power transformer re-wiring via internal switch and fuse value change. 100VAC operation changeover achieved via rewiring of power transformer PCB.

Mains Voltage Frequency: 50~ 60Hz

PSU Regulation good for 65% rated voltage: 75VAC for 117V unit or 150VAC for 234V wired unit.

Unit weight: Steelhead: 15 lbs. - PSU: 18 lbs.

Chassis dimensions: Steelhead: 19 wide x 3.5 tall x 15.5 deep - PSU: 13.5 wide x 4.5 tall x 11.375 deep

PSU umbilical cord length: 5 1/2 feet approx. 1.65m

Minimum mounting allocation footprint including all projecting parts and controls:

Steelhead: 19 wide x 4.125 tall x 18 deep - (allow an additional 6 inches depth for PSU umbilical cord projecting out in the center)

PSU: 13.5 wide x 4.625 tall x 12.5 deep - (allow an additional 6 inches depth for PSU umbilical cord projecting out in the left)

Your phono input cables need to be able to spread 9" apart.

Your LINE input RCA cables need to be able to spread 12.250" apart.

Your Output cables need to be able to spread 15" apart.

The chassis itself is 17" wide. The faceplate is 19" wide.



 
 
 
 

1. 우체국등기소포(우편)으로 전국 어느 곳이든 3~4일 이내 배송이 가능합니다. (공휴일 제외)
2. 온라인 송금을 하신 경우에는 입금확인후 익일부터 배송 기간에 포함합니다. 천재지변 등 불가항력적인 사유 발생 시 그 해당기간 동안은 배송기간에서 제외합니다.
3. 주문하신 상품이 훼손되어 배달된 경우, 상품을 수령한 날로부터 20일내에 구매를 취소하실 수 있습니다.
4. 고객께서 온라인 송금으로 결제하셨을 경우 고객의 은행계좌로 송금하는 방법으로 환불하여 드립니다.
5. 주문하신 상품이 물류 특성상 다른 시간대에 배송이 될수도 있습니다.
    1. 사업자등록번호  106-01-70136      대표자:김형진    업태:도.소매  종목: 가전제품. 통신판매외     통신판매번호 2017 서울용산 0428
       
      서울시 용산구 청파로 74 전자랜드본관 289호 서울전자  Mail : cyberav@empas.com
       
      입금계좌    우리은행(김형진) 180-288297-13-001     국민은행(김형진) 036-24-0186773
       
      02-3272-1300  02-3273-1300     김형진  010-9622-1122