Power
Mains volt­age: 100…120 V or 200…240 V

Fuse rat­ing: 500 mA slow blow at 100…120 V, 250 mA slow blow at 200…240 V

Power con­sump­tion: 15 VA max.

Power con­sump­tion in standby: 0.5 VA max.

Size DAC501
Depth: 30 cm
Width: 18,8 cm
Height: 6,6 cm
Height with feet: 7,2 cm

Size DAC502
Depth: 30 cm
Width: 45 cm
Height: 6,6 cm
Height in­clud­ing feet: 7,4 cm

Size Remote
Depth: 2,1 cm
Width: 4,5 cm
Height: 16,6 cm

Avail­able Color
Sil­ver, Black

Dig­i­tal Inputs
(1) XLR connector
(1) RCA connector
(1) TOSLINK con­nec­tor (optical)
(1) USB type B connector

(1) RJ45 Eth­er­net connector
All in­puts ac­cept pro­fes­sional or con­sumer stan­dard , i.e. ac­cept AES/EBU or S/PDIF sig­nals
. Sam­pling fre­quen­cies: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz or 192 kHz on any of the inputs

Max­i­mum in­put word-length: 24 Bits

Dig­i­tal Outputs
none

Ana­log Out­puts

(2) XLR con­nec­tors (hot on pin 2), short cir­cuit proof out­put cir­cuitry, out­put im­ped­ance tbd Ω
(2) RCA con­nec­tors, short cir­cuit proof out­put cir­cuitry, out­put im­ped­ance tbd Ω

The out­put level is se­lec­table via the LCD menu; four set­tings are pro­vided as shown below:

XLR Output:
8.15 Vrms +20.44 dBu with a 0 dBFS sine wave input

4.15 Vrms +14.57 dBu with a 0 dBFS sine wave in­put

2.12 Vrms +7.74 dBu with a 0 dBFS sine wave in­put

1.06 Vrms +2.72 dBu with a 0 dBFS sine wave input

These lev­els are achieved with a 0.0 dB set­ting for the level con­trol on the LCD screen.

Sug­gested sub­se­quent am­pli­fier in­put im­ped­ances:

8.15 Vrms set­ting: 500 Ω or higher

4.15 Vrms set­ting: 300 Ω or higher

2.12 Vrms set­ting: 150 Ω or higher

1.06 Vrms set­ting: 70 Ω or higher

RCA Output:
4.08 Vrms +14.42 dBu with a 0 dBFS sine wave input

2.08 Vrms +8.55 dBu with a 0 dBFS sine wave in­put

1.06 Vrms +1.72 dBu with a 0 dBFS sine wave in­put

0.53 Vrms −3.30 dBu with a 0 dBFS sine wave input

These lev­els are achieved with a 0.0 dB set­ting for the level con­trol on the LCD screen.

Sug­gested sub­se­quent am­pli­fier in­put im­ped­ances:

4.08 Vrms set­ting: 250 Ω or higher

2.08 Vrms set­ting: 150 Ω or higher
1.06 Vrms set­ting: 75 Ω or higher

0.53 Vrms set­ting: 35 Ω or higher


Head­phone Output:
(1) stereo 1/4-inch jack con­nec­tor, DC cou­pled, short cir­cuit proof out­put cir­cuitry. The out­put level is se­lec­table via the LCD menu; four level set­tings are pro­vided as shown below:

5.2 Vrms +16.53 dBu

2.7 Vrms +10.84 dBu

0.9 Vrms +1.30 dBu

0.2 Vrms −11.77 dBu

These lev­els are achieved with a 0.0 dB set­ting for the level con­trol on the LCD screen.

Sug­gested head­phone impedances:
5.2 Vrms set­ting: 100 Ω or higher with a 0 dBFS sine wave in­put

2.7 Vrms set­ting: 50 Ω or higher with a 0 dBFS sine wave in­put

0.9 Vrms set­ting: 16 Ω or higher with a 0 dBFS sine wave in­put

0.2 Vrms set­ting: 4 Ω or higher with a 0 dBFS sine wave input

The same pa­ra­me­ters ap­ply to the 4 pin head­phone out­put of the DAC502 as well.