전자랜드 하계휴가 기간 안내
중고/위탁제품
Entreq
DDC/ DAC
Network Player/DAP
HIFI 앰프
진공관 앰프
톨보이형스피커
BBC 라이센스 스피커
북셀프/서라운드
CD/SACD PLAYER
턴테이블
카트리지
전원장치
케이블
RADIO
PHONO EQ/헤드폰앰프
TUNER
주변기기/스탠드
미니오디오
한정 세일
서울전자 추천상품
새로 입고된 제품
시스템
추천상품
5.1 스피커
신제품 소개
청음실안내
판매완료제품/단종제품
제품뉴스
리뷰 모음
제품 설치기
질문과 답변
중고 장터
자료실
WHAT-HIFI탐방기
자유 게시판
서울전자 뉴스
정기휴무일
우리은행 에스크로
A/S 센타
찾아오시는길
동호회
배송추적
(0)
::: 현재위치 HOME> 자료실 > 자료실
제 목
EmmLabs DAC2X Ver.2 펌웨어 업데이트
작성자
서울전자
번 호
165
 파 일
내 용
 

EmmLabs DAC2X Ver.2 펌웨어 입니다.


V2 키트를 교환 후에 하는 펌웨어입니다.



DAC2X Firmware Update Instructions:
Before we start:
!! DO NOT USE TO UPDATE DAC2 OR ANY OTHER EMM PRODUCT EXCEPT DAC2X !!
1. Prior to doing any firmware updates you can send an email to support@meitner.com with your serial
number to request if the product needs any firmware update. You can also ask your dealer or distributor
about firmware updates for the product you have purchased. New products normally do not need to
be updated as they already have the latest software installed and there is generally 1 update per
year for any product.
2. If you are unfamiliar with Windows based systems or computers in general please do not attempt.
Please arrange with your EMM Labs dealer or distributor to have the product updated at their facility or
send the unit back to EMM Labs for service.
3. Please make a note of your product’s serial number. This is very important when doing firmware updates.
Use only the firmware specific to your product’s serial number. This is provided either with your update
package or sent to you separately by EMM support.
4. Use any Windows XP, Windows 7 or 8 computer system but make sure it has up to date USB drivers for
its USB ports.
5. DO NOT USE A MAC or OSX system to install the update.
6. Please reset or reboot your computer to make sure we start the installation process with a refreshed
system and all resources are freed.
7. The update files are compressed either using Winzip or Winrar. You can just download and install
Winrar from www.rarlab.com in order to uncompress the downloaded file.
8. Uncompress the zip/rar file and drag and drop the “DAC2X Update” folder onto your desktop.
9. If performing the update on a new computer previously not used for updating the DAC2X please
install the DAC2X USB firmware driver first. Locate the following folder “CP210x_VCP_Windows”
in the DAC2X Update” folder and depending on your Windows type (standard or 64-bit) you will
need to double click and run the USB firmware driver setup.
I. Double click and run the following setup file “CP210xVCPInstaller_x86.exe” to install the
standard USB firmware drivers.
II. Double click and run the following setup file “CP210xVCPInstaller_x64.exe” to install the
64-bit version of the USB firmware drivers if you running 64-bit Windows.
10. Only use the included “DAC2X_Update_Utility.exe” application to update the DAC2X.
11. Please reset or reboot your computer to make sure we start the installation process with a refreshed
system and all resources are freed.
Instructions:
1. Make sure DAC2X is turned ON.
2. Plug in USB cable from the computer to the DAC2X. Please see picture of the type of USB cable
needed, this is a common A/B type cable that is used to connect a computer to a USB enabled printer.
Please also note that the B type connector end of the cable must be plugged into the “Service USB” port
and NOT the “USB Audio” port of the DAC2X.
USB A/B Type Cable SERVICE USB PORT
3. Go into the “DAC2X Update” folder and launch new update utility called “DAC2X_Update_Utility.exe”.
4. Click the "Browse" button and select from the “Update Files” folder within the “DAC2X Update” folder the
included latest MCS update file.
5. As previously mentioned at the beginning of the instructions you need to install the appropriate firmware
depending on the serial number of your DAC2X. The firmware file included in the “Update”
folder/directory should have the format:
“DAC2X_V_DD-MMMM-YYYY_XXXX.mcs”
XXXX is the serial number of your unit and DD-MMMM-YYYY is the date of the firmware release.
6. Select a COM port from the drop down list. In most cases please select a higher COM port then the
default COM3 from the selection drop down box because this is usually reserved by the system.
7. Click the "Connect" button and you should see the Status box display a message as shown in the
picture below.
8. Once connected, press the “Update” button.
9. You may have to select a different COM port depending on the computer and USB connection
you have. As per the example, we had to choose COM9 instead of the default COM3. You will
know this almost immediately because when you press the “Update” button, nothing will happen
and the “Status” box will not flash any messages telling you the update is taking place. In this
case press “Disconnect” then select a different COM port from the drop down list and try again.
10. Please note that it may take up to a minute, depending on the computer and resource allocation
for the Update Utility to start re-programming the DAC2X after you press the “Update” button. In
this time it will look like nothing is happening and there will be no message in the “Status”
window. Please allow at least a minute of inactivity before trying step 11.
11. Please REBOOT your computer to reset and free its resources if:
a. You only see the default COM3 in the drop down list and you cannot connect to COM3 or
nothing happens when you start the update. Please see step 9 and 10.
b. There are no COM ports listed in the drop down list for you to select.
c. You cannot connect or nothing happens when you press the “Update” button when you select
the COM ports listed in the drop down list.
12. Once the update procedure is working, DO NOT TURN OFF DAC2X OR INTERRUPT THE UPDATE
PROCESS. DO NOT DO ANYTHING WITH THE COMPUTER OR DAC2X UNTIL THE PROCEDURE
IS COMPLETE. This may cause permanent damage to your DAC2X and it would have to be sent
back to EMM Labs for repair.
13. When done you will see the following in the Status box and the displayed instruction window to tell you
to reboot the DAC2X. Press the “OK” button then close the DAC2X update software.
14. To properly reboot the DAC2X; first turn the front panel button OFF then turn the back panel main power
button OFF. Disconnect the USB cables.
15. Reboot the computer if you are using the same computer to connect to the DAC2X for audio playback.
16. Turn the DAC2X on and reconnect the USB cable from the DAC2X USB Audio port to an appropriate
USB port on the computer.
17. The DAC2X should now be properly updated.



untitled.png
 
untit2.png
 
un2png.png
 

3d.png
 
 
 
닉네임 
비밀번호 
코멘트달기
 
         
번 호 제 목 파일 작성자
178     DCS Vivaldi DAC 2.0 소프트웨어 업데이트      서울전자
177     패시브래디에이터      서울전자
176     에어플레이2(AirPlay 2)와 만나보세요      서울전자
175     유니티 코어 사용을 위한 팁      서울전자
174     네임 뮤조      서울전자
173     와이어월드 7 시리즈 파격세일      서울전자
172     Entreq Olympus Ten 6대 도입기 (유저 사용기)      서울전자
171     New Uniti 시리즈: 네임 오디오 본사 담당자와의 인터뷰      서울전자
170     네임 오디오의 CD 리핑      서울전자
169     네임 오디오 본사 담당자와의 인터뷰 네임 유니티 시리즈      서울전자
168     AES/EBU DIGITAL 단자번호      서울전자
167     The Naim Audio Way      서울전자
166     네임의 무한한 호기심      서울전자
165     EmmLabs DAC2X Ver.2 펌웨어 업데이트      서울전자
164     마이트너 MA1 Ver.2 펌웨어 업데이트      서울전자
163     2017 The Gryphon Invitation      서울전자
162     루민 앱 사용방법      서울전자
161     루민 앱 사용설명서      서울전자
160     Roon(룬)      서울전자
159     네임오디오 한글설명서보기(Uniti2 시리즈)      서울전자
158     네임 뮤조 최신 펌웨어 1.5 버전 출시      서울전자
157     Naim MUSO 설치방법      서울전자
156     벅스의 고음질 음원을 네임을      서울전자
155     DSD(Direct Stream Digital)      서울전자
154     naim mu-so로 spotify 즐기는 방법      서울전자
153     네임 mu-so 시스템 펌웨어 V1.2 업데이트 가이드      서울전자
152     TIDAL(네임, 새로운 스트리밍 펌웨어 예고)      서울전자
151     뮤조에서 앱을 통해 USB내의 일부 flac파일이 들어간 폴더가 보이지않는 문제      서울전자
150     네임 네트워크 펌웨어 V4.3 업데이트 배포      서울전자
149     네임 mu-so 시스템 펌웨어 V1.2 업데이트      서울전자
148     Naim(네임) Muso wireless speaker 한글 메뉴얼      서울전자
147     KHAS 2014 에 사용되었던 소스      서울전자
146     KHAS 2014 오디오쇼      서울전자
145     EMM Labs DAC2X 및 Meitner MA1의 새로운 펌웨어 들 입니다.      서울전자
144     시청회      서울전자
143     네임오디오의 인터넷 라디오 320K 유선 끊김현상에 대하여      서울전자
142     Apple AirPlay      서울전자
141     NPC 사용시 LP 레코드를 위한 Vinyl Studio 사용법      서울전자
140     Entreq 공구예정      서울전자
139     Naim DR 업그레이드      서울전자
138     Ps Audio PerfectWave P5 / P10 의 MultiWave 업데이트      서울전자
137     네임 유니티(Naim Uniti )시리즈 문제해결방법      서울전자
136     유니큐트 리모트 리셋팅 법!      서울전자
135     Entreq      서울전자
134     jj진공관      서울전자
133     jriver 설정방법      서울전자
132     네임 오디오 이벤트, DAC-V1을 잡아라~      서울전자
131     네임오디오 INTERVIEW      이종학
130     마르텐 탐방기      이종학
129     캠브리지오디오 USB 2.0 드라이버는      서울전자
 
    1. 사업자등록번호  106-01-70136      대표자:김형진    업태:도.소매  종목: 가전제품. 통신판매외     통신판매번호 2017 서울용산 0428
       
      서울시 용산구 청파로 74 전자랜드본관 289호 서울전자  Mail : cyberav@empas.com
       
      입금계좌    우리은행(김형진) 180-288297-13-001     국민은행(김형진) 036-24-0186773
       
      02-3272-1300  02-3273-1300     김형진  010-9622-1122